Deepak Gupta Ph.D., Dr.

Deepak Gupta Ph.D., Dr.

Deepak Gupta Ph.D., Dr.

Professor, Department Chair, and Graduate Coordinator

Industrial Systems and Manufacturing · College of Engineering

Academic Interests and Expertise

  • Energy efficiency and sustainability
  • Manufacturing system optimization
  • Supply chain management
  • Industrial productivity
  • Data analytics

Areas of Teaching Interest

  • Energy efficiency and sustainability
  • Supply chain management
  • Forecasting and analytics
  • Project Management
  • Advance engineering economics
  • Quality control

Publications

(*Indicates student co-authors)

Journal Articles

  1. Singh, S.S.*, Gupta, D., and Anand, V., Blood donation drive management: a discrete event simulation-based approach for enhanced operational efficiency, Journal of Blood Service Economics, 2024. 
  2. Abdirad, M.*, Krishnan, K. K., & Gupta, D., “Dynamic multi-depot vehicle routing problem in the era of Industry 4.0,” International Journal of Procurement Management, 18(1), 68-81, 2023.
  3. Mokhtari-Moghadam, A.*, Pourhejazy, P. & Gupta, D., “Integrating sustainability into production scheduling in hybrid flow-shop environments,” Environmental Science and Pollution Research, 2023. https://doi.org/10.1007/s11356-023-26986-3.
  4. Kianpour, P.*, Gupta, D., and Gopalakrishnan, B., “DOE-based Enhanced Genetic Algorithm for Unrelated Parallel Machine Scheduling to Minimize Earliness and Tardiness Costs,” Journal of Optimization in Industrial Engineering, Vol. 16, Issue 2, pp. 99-114, 2023.
  5. Kianpour, P.*, Gupta, D., and Gopalakrishnan, B., “Investigating total earliness and tardiness costs through unrelated parallel machine scheduling in uncertain job shop environment using robust optimization and design of experiment,” International Journal of Operational Research, Vol. 45, No. 4, pp. 511-539, 2022.
  6. Abdirad, M.*, Krishnan, K. and Gupta, D., “Three-Stage Algorithms for the Large-Scale Dynamic Vehicle Routing Problem with an Industry 4.0 Approach,” Journal of Management Analytics, 9, Issue 3, 2022.
  7. Kianpour, P.*, Gupta, D., Krishnan, K., and Gopalakrishnan, B., “Automated job shop scheduling with dynamic processing times and due dates using project management and industry 4.0,” Journal of Industrial and Production Engineering, Vol. 38, No. 7, pp. 485-498, 2021.
  8. Kianpour, P.*, Gupta, D., Krishnan, K., and Gopalakrishnan, B., “’Optimising unrelated parallel machine scheduling in job shops with maximum allowable tardiness limit,” International Journal of Industrial and Systems Engineering, Vol. 37, No.3, pp.359 – 381, 2021.
  9. Abdirad, M.*, Krishnan, K. and Gupta, D., “A two-stage metaheuristic algorithm for the dynamic vehicle routing problem in Industry 4.0 approach,” Journal of Management Analytics, Vol. 8, Issue 1, 2021.
  10. Alsobhi, S.*, Krishnan, K.K., Gupta, D., and Almaktoom, A.*, “Analysis of Damage Costs in Supply Chain Systems,” International Journal of Industrial and Systems Engineering, Vol. 28, No. 1, 2018.
  11. Alsobhi, S.*, Krishnan, K.K., Dhuttargaon, M.*, and Gupta, D., “Design of Supply Chain Damage Recovery Systems,” Journal of Supply Chain and Operations Management, Vol. 15, No. 1, 2017.
  12. Gopalakrishnan, B., Gupta, D.P., Chaudhari, S.*, The Effect of System Storage on the Performance Profile of Rotary Screw Air Compressors, Energy Engineering Journal, Vol. 111, No. 4, pp. 25–33, 2014.
  13. Muniswamy, A.*, Gopalakrishnan, B., Chaudhari, S.*, Jaridi, M., Crowe, E., and Gupta, D., “A Computer-Based Total Productive Maintenance Model for Electric Motors”, International Journal of Productivity and Quality Management, Vol.13, No.2, pg.178 – 200, 2014.
  14. Chaudhari, S.*, Gupta, D., and Gopalakrishnan, B., “Using IAC Database for Longitudinal Study of Small to Medium Sized Automotive Industry Suppliers’ Energy Intensity Changes”, International Journal of Materials and Manufacturing, Vol. 6, No. 3, pp. 427–435, 2013.
  15. Gopalakrishnan, B., Mardikar, M.*, Gupta, D.P., Jalali, S.*, Chaudhari, S.*, “Establishing Baseline Electrical Energy Consumption in Wood Processing Sawmills: A Model Based on Energy Analysis and Diagnostics”, Energy Engineering Journal, Vol. 109, Issue 5, pg. 40-80, 2012.
  16. Chaudhari, S.*, Gupta, D., and Gopalakrishnan, B., “Investigation of Relationship between System Efficiency Curve & Measurement and Verification (M&V) of Energy Savings”, SAE International Journal of Materials and Manufacturing, Vol. 4 No. 1, pg. 486-494, June 2011.
  17. Gupta, D., Gopalakrishnan, B., Chaudhari, S.*, Jalali, S.M.*, “Development of an Integrated Model for Process Planning and Parameter Selection for Machining Processes”, International Journal of Production Research, Vol. 49, Issue 21, 2011.
  18. Gopalakrishnan, B., Gajera, D.*, Gupta, D.P., Athinarayanan, R., and Chaudhari, S.A.*, “Process Costing of the Microchip”, International Journal of Industrial and Systems Engineering, Vol. 8, No.3, 2011.
  19. Gerdes, K., Fuller, J.A., Gopalakrishnan, B., Gupta, D.P., Energy Supply Concerns: A United States Perspective on Electric Power Generation, Energy Studies Review, Vol. 17, Issue 1, 2010.
  20. Gopalakrishnan, B., Chavan, R.R.*, Gupta, D., and Alkadi, N., “Energy Consumption Modelling and Benchmarking in Continuous Galvanizing Lines”, International Journal of Energy Technology and Policy, Vol. 7, No. 3, 2010.
  21. Gupta, D. and Gopalakrishnan, B., “Energy Sensitive Machining Parameter Optimisation”, International Journal of Industrial and Systems Engineering, Vol. 5, No. 4, pg.405 – 423, 2010.
  22. Gupta, Deepak, Gopalakrishnan, B., and Godavarthy, H.*, “Energy Conservation through Productivity Enhancement in Manufacturing Facilities”, SAE International Journal of Materials and Manufacturing, Vol. 1, No. 1, pg. 600-611, April 2009.
  23. Gopalakrishnan, B., Kokatnur, A.*, Gupta, D. P., “Design and Development of a Target-Costing System for Turning Operation”, Journal of Manufacturing Technology Management, Vol. 18 No. 2, 2007.
  24. Gopalakrishnan, B., Turuvekere, R.*, Gupta, D.P., “Computer Integrated Facilities Planning and Design”, Facilities, Vol. 22, No. 7/8, 2004.
  25. Gopalakrishnan, B., Reddy, V.K.*, Gupta, D.P., “Neural Network for Estimating the Tool Path Length in Concurrent Engineering Applications”, Journal of Intelligent Manufacturing, Volume 15, Issue 1, pp. 5-15, February 2004.
  26. Gopalakrishnan, B., Weng, Li*, Gupta, D.P., Facilities Design using a Split Departmental Layout Configuration, Facilities, Volume 21, No. 3, 2003.

Conference Articles, Abstracts and Equivalent

  1. Joshi, R.*, Singh, S.S.*, Gupta, D., and Anand, V., “Energy-Aware Optimization of Distributed Flexible Job Shop Scheduling Problems with Deterministic Setup and Processing Times,” Proceedings of the International Conference on Industrial Engineering and Operations Management, 2024. 
  2. Singh, S.S., Gupta, D., and Anand, V., “Lean Strategies in Blood Collection: Optimization with Simulation,” International Conference on Industry, Engineering, and Management Systems, 2024.
  3. Shoaeinaeini, M.*, Ozturk, O.*, and Gupta, D., “Twitter-informed Prediction for Urban Traffic Flow Using Machine Learning,” 2022 IEEE International Conference on Universal Village (UV), October 22-25, 2022.
  4. Babu, A.*, Anand, V., Beer, B.*, Gupta, D., and Li, H., “Information Flow in Blockchain Enabled Supply Chain Using Hyperledger,” 2022 INFORMS Conference on Security, Arlington, VA, August 29-30, 2022.
  5. Mokhtari-Moghadam, A. and Gupta, D., “Multi-objective optimization for energy-efficient flexible flow shop scheduling problem with sequence-dependent setup times,” International Conference on Industry, Engineering, and Management Systems, 2021.
  6. Al-Awadh, M.* Weheba, G., and Gupta, D., “Students Perceptions of Quality in E-Learning,” International Conference on Industry, Engineering, and Management Systems, Clearwater, FL, 2021.
  7. Asaduzzaman, A., & Gupta, D., “Geospatial Cyberinfrastructure for Regional Economic Growth,” 17th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), 723-726, IEEE, 2020.
  8. Sabzi, B., Gupta, D., and Krishnan, K., “Lot-Streaming Flow-Shop Scheduling Optimization with Setup, Warm-Up, and Idle Times,” International Conference on Industry, Engineering, and Management Systems, 2020.
  9. Kianpour, P.* and Gupta, D., “Job Shop Scheduling in Uncertain Environment using Robust Optimization,” IISE Annual Conference & Expo, Orlando, FL, May 18-21, 2019.
  10. Kianpour, P.* and Gupta, D., “Lean Manufacturing and JIT Production through Unrelated Parallel Machine Scheduling Optimization in Uncertain Job Shop Environment using Robust Optimization,” International Conference on Industry, Engineering, and Management Systems, Clearwater, FL, 2019.
  11. Tiwari, H.* and Gupta, D., “Energy Efficient Job Scheduling under Dynamic Pricing with Earliness and Tardiness Penalty,” International Conference on Industry, Engineering, and Management Systems, Clearwater, FL, 2019.
  12. Al-Awadh, M.* and Gupta, D., “Students Perceptions of Quality in E-Learning,” International Conference on Industry, Engineering, and Management Systems, Clearwater, FL, 2019.
  13. Kianpour, P.*, Gupta, D., Krishnan, K., and Gopalakrishnan, B., “Optimizing Total Earliness and Tardiness Costs with Maximum Allowable Tardiness Limit Through Unrelated Parallel Machine Scheduling in Job Shops,” INFORMS Annual Meeting, Phoenix, AZ, 2018.
  14. Alsobhi, S.*, Krishnan, K.K., and Gupta, D., “Supply Chain System Optimization with Damaged Product Recovery,” ISERC 2015 Annual Conference & Expo, May 30, 2015.
  15. Alsobhi, S.*, Krishnan, K.K., and Gupta, D., “Product Damaged Recovery model for supply chain system to maximize profit,” Proceedings of the 3rd Annual World Conference of the Society of Industrial and Systems Engineering, San Antonio, TX, October 20-22, 2014.
  16. Alsobhi, S.*, Krishnan, K.K., and Gupta, D., “Mathematical Model for Cost and Damage Reduction in Supply Chain Network,” Proceedings of the 3rd Annual World Conference of the Society of Industrial and Systems Engineering, San Antonio, October 20-22, 2014.

  17. Gopalakrishnan, B., Jalali, M.S.*, Chaudhari, S.*, Gupta, D., and Crowe, E., “Design and Development of an Energy Efficiency Knowledge Center (EEKC),” 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO), Vienna, Austria, 692-699, September 1-3, 2014.

  18. Chaudhari, S.*, Gupta, D., and Gopalakrishnan, B., “Using IAC Database for Longitudinal Study of Small to Medium Sized Automotive Industry Suppliers’ Energy Intensity Changes”, SAE World Congress & Exhibition, Detroit, Michigan, USA, 2013.

  19. Gopalakrishnan, B., Gump, C.D.*, Gupta, D.P., and Chaudhari, S.A.*, “Development of a Software System to Facilitate Implementation of Coal and Wood Co-Fired Boilers”, Proceedings of 2012 Industrial Energy Technology Conference, New Orleans, LA, USA, May 30-31, 2012.

  20. Gopalakrishnan, B., Bitar, A., Gupta, D.P., “Analysis of Compressed Air and Process Heating Systems – A Case Study from Automotive Parts Manufacturer in Mexico”, SAE World Congress & Exhibition, Detroit, Michigan, USA, April 24-26, 2012.
  21. Gupta, D., Athinarayanan, R., and Deken, B., “Development of Green Technology Curriculum,” Proceedings of the 2011 ASEE Annual Conference, June 2011.
  22. Chaudhari, S.*, Gupta, D., and Gopalakrishnan, B., “Investigation of Relationship between System Efficiency Curve & Measurement and Verification (M&V) of Energy Savings”, SAE World Congress & Exhibition, Detroit, Michigan, USA, April 12-14, 2011.
  23. Creese, R.C. and Gupta, D., “Combined Individual-Team Based Project”, Proceedings of the 2010 American Society for Engineering Education Annual Conference & Exposition, Louisville, KY, American Society for Engineering Education, 2010.
  24. Gopalakrishnan, B., Gupta, D.P., Energy Efficiency in Industrial Process Heating Systems, Knovel Engineering Cases – Where Theory Meets Practice, Online Article, December 16, 2009. 
  25. Creese, R.C. and Gupta, D., “Software Development for Team Projects in Manufacturing”, Proceedings of the 2009 American Society for Engineering Education Annual Conference & Exposition, Austin, TX, American Society for Engineering Education, 2009.
  26. Gopalakrishnan, B., and Gupta, D., “Compressed Air Energy Saving Assessments (ESA) for the Automotive Supply Chain”, SAE World Congress & Exhibition, Detroit, Michigan, USA, April 20-23, 2009.
  27. Creese, R.C. and Gupta, D., “Multi-Disciplinary Team Project with Software”, Proceedings of the 2008 American Society for Engineering Education Annual Conference & Exposition, Pittsburgh, PA, American Society for Engineering Education, June 22-25, 2008.
  28. Gupta, D., Gopalakrishnan, B., and Godavarthy, H.*, “Energy Conservation through Productivity Enhancement in Manufacturing Facilities”, SAE World Congress & Exhibition, Detroit, Michigan, USA, April 14-17, 2008.
  29. Gopalakrishnan, B., Gupta, D.P., Mardikar, Y.*, Chaudhari, S.*, Industrial Energy Efficiency (reviewed by Editor), Handbook of Environmentally Conscious Manufacturing, John Wiley & Sons, Inc., 2007.
  30. Creese, R.C. and Gupta, D., “Software for Materials Evaluation”, Proceedings of the 2007 American Society for Engineering Education Annual Conference & Exposition, Honolulu, Hawaii, American Society for Engineering Education, June 24-27, 2007.
  31. Creese, R.C. and Gupta, D., “An Integrated Approach to Manufacturing Design”, Proceedings of the 2007 American Society for Engineering Education Annual Conference & Exposition, Honolulu, Hawaii, American Society for Engineering Education, June 24-27, 2007.
  32. Gopalakrishnan, B., Gupta, D.P., Mardikar, Y.*, Chaudhari, S.*, and Jadeja, J.*, “Diagnostics for Developing Energy Efficiency Measures in Compressed Air Systems”, SAE 2007 World Energy Congress, Detroit, Michigan, USA, April 16-19, 2007.
  33. Creese, R.C. and Gupta, D., “Economic Evaluation of Structures of Different Shapes and Materials with Processing Considerations”, Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition, American Society for Engineering Education, 2005.
  34. Creese, R.C., Gupta, D., and Zhi, Y.*, “Team-based Design Using Custom Designed Software”, Looking Forward: Innovations in Manufacturing Engineering Education, CIMEC(CIRP), 3rd SME Intl, Conf. on Manufacturing Education, Copyright 2005 Society of Manufacturing Engineers, ISBN 0-87263-824-3, pp 320-327, 2005.
  35. Gopalakrishnan, B., Mate, A.*, Mardikar, Y.*, Gupta, D., Plummer, R., Anderson, B., “Energy Efficiency Measures in the Wood Manufacturing Industry”, Proceedings of the 2005 ACEEE (American Council for an Energy Efficient Economy) Summer Study on Energy Efficiency in Industry on CD ROM, ISBN 0-918249-54-6, West Point, New York, July 2005.
  36. Gopalakrishnan, B., Kokatnur, A.*, Gupta, D., “Application of Target Costing in Machining”, Proceedings of the Intelligent Systems in Design and Manufacturing V Conference, Society of Photo Optical Instrumentation Engineers (SPIE), Philadelphia, Vol. 5605, pp. 238-249, 2004.
  37. Gupta, D.P., Gopalakrishnan, B., “Real Time Intelligent Decision Making with Data Mining”, Proceedings of the Intelligent Systems in Design and Manufacturing V Conference, Society of Photo Optical Instrumentation Engineers (SPIE), Rhode Island, October 2003.

Professional Experience

  • Sept’24 – present: Chair of Industrial, Systems, and Manufacturing Engineering (ISME) Department, Wichita State University (WSU), Wichita, KS
  • Aug’17 – present: Professor (2020-present)/Associate Professor (2017-2020) of ISME, WSU
  • Jan’18 – present: Graduate Program and Enrollment Management Coordinator of ISME, WSU 
  • Jan’14 – Aug’17: Director of Engineering Technology (ET) and Associate Professor of ISME, WSU
  • Nov’13 – Dec’13: Director of Engineering Technology (as a consultant), WSU
  • Aug’07 – Dec’13: Associate Professor (Jul’12-Dec’13)/Assistant Professor (Feb’08-Jun’12)/Instructor ABD (Aug’07-Jan’08), Department of Industrial & Engineering Technology (IET), Southeast Missouri State University (SEMO), Cape Girardeau, MO

  • Jul’00 – Jul’01: Industrial Engineer, Department of Industrial Engineering, Hindalco Industries Ltd., India (a Birla Group company)